{"id":166,"date":"2023-06-13T16:00:14","date_gmt":"2023-06-13T16:00:14","guid":{"rendered":"https:\/\/www.theoaktree.us\/?page_id=166"},"modified":"2024-04-15T01:36:40","modified_gmt":"2024-04-15T01:36:40","slug":"iso-standards","status":"publish","type":"page","link":"https:\/\/www.theoaktree.us\/?page_id=166","title":{"rendered":"ISO Standards"},"content":{"rendered":"\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
ISO-Standards Operations: The Oaktree is either certified or follow the following ISO standards.<\/h5>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 9001-2015<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

Quality Management System -It helps organizations of all sizes and sectors to improve their performance, meet customer expectations and demonstrate their commitment to quality. Its requirements define how to establish, implement, maintain, and continually improve a quality management system (QMS).<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

\n\t\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 45001<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

Occupational health and safety management systems \u2014 Requirements with guidance for use \u2014 Amendment 1: Climate action changes<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

\n\t\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 14001<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

Environmental management systems -It provides a framework for organizations to design and implement an EMS, and continually improve their environmental performance.<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

\n\t\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 15259<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

Air quality -Requirements for measurement sections and sites and for the measurement objective, plan and report<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

\n\t\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 15493<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

Plastics piping systems for industrial applications –<\/p>

specifies the characteristics and requirements for components such as pipes, fittings and valves made from one of the following materials:<\/p>

  • acrylonitrile-butadiene-styrene (ABS)<\/li>
  • unplasticized poly(vinyl chloride) (PVC-U);<\/li>
  • chlorinated poly(vinyl chloride) (PVC-C);<\/li><\/ul><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 10508<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Plastics piping systems for hot and cold water installations –\u00a0gives guidance for the classification and design of hot and cold water pressure systems which use plastics pipes and plastics or metal fittings.<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 14726<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Identification colours for the content of piping systems – specifies main colours and additional colours for identifying piping systems in accordance with the content or function.<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 7005-1<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Pipe flanges – Establishes a base specification for pipe flanges suitable for general purpose and industrial applications including, but not limited to, chemical process industries, electric power generating industries, petroleum and natural gas industries.<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 7-1<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Pipe threads where pressure-tight joints are made on the threads –\u00a0<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 13732-1<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Ergonomics of the thermal environment \u2014 Methods for the assessment of human responses to contact with surfaces\u00a0<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 16852<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Specifies the requirements for flame arresters that prevent flame transmission when explosive gas-air or vapour-air mixtures are present.<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 5667-3<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    General requirements for sampling, preservation, handling, transport and storage of all water samples for physicochemical, chemical, hydrobiological and microbiological analyses and determination of radiochemical analytes and activities.<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 5667-10<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Guidance on sampling of waste water<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 5667-13<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t
    <\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t
    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 5667-13:2011<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    guidance on the sampling of sludges from wastewater treatment works, water treatment works and industrial processes.<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 5667-14<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Guidance on quality assurance and quality control of environmental water sampling and handling<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 5667-17:2008<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Applicable to the sampling of suspended solids for the purpose of monitoring and investigating freshwater quality, and more particularly to flowing freshwater systems such as rivers and streams.<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 5667-20:2008<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Establishes principles, basic requirements, and illustrative methods for dealing with the use of sample data for decision making based on the assessment of the confidence that water quality: meets targets and complies with thresholds; has changed; and\/or lies in a particular grade in a classification system.<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 6107:2021<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Defines terms used in certain fields of water quality characterization.<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 22447:2019<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Specifies the principles, categories, and codes for the classification of industrial wastewater and is applicable to all types and sources of industrial wastewater.<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 7504:2015<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Defines terms related to gas analysis, with the main focus on terms related to calibration gas mixtures for use in gas analysis and gas measurements.<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tSO 11843-6:2019<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Presents methods for determining the critical value of the response variable and the minimum detectable value in Poisson distribution measurements.<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 22423:2019<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Specifies the method for comparing performance evaluation results for a foil thrust bearing that supports load with aerodynamic force generated by the rotation of a driving shaft and lubricates using air, not lubricating oil.<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 15259:2023<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Air quality
    Measurement of stationary source emissions
    Requirements for measurement sections and sites and for the measurement objective, plan and report<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 16664:2017<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Describes factors that may influence the composition of pure gases and homogeneous gas mixtures used for calibration purposes.<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 19229:2019<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Establishes the requirements for the purity analysis of materials used in the preparation of calibration gas mixtures and the use of these purity data in calculating the composition of the mixture thus prepared.<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 19230:2020<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Specifies the general provisions and gives the basic definitions of terms relating to sampling for gas analysis, including sampling devices, sampling methods, sampling technical considerations, and sampling safety.<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 9096:2017<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Describes a reference method for the measurement of particulate matter (dust) concentration in waste gases of concentrations from 20 mg\/m3<\/sup>\u00a0to 1 000 mg\/m3<\/sup>\u00a0under standard conditions.<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 10780:1994<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Methods for determining the velocity and volume flowrate of gas streams in ducts, stacks and chimneys vented to the atmosphere.<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 10849:2022<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Specifies a method for the determination of nitrogen oxides (NOx<\/sub>) in flue gas of stationary sources and describes the fundamental structure and the key performance characteristics of automated measuring systems.<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 12039:2019<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Specifies the fundamental structure and the most important performance characteristics of automated measuring systems for carbon monoxide (CO), carbon dioxide (CO2<\/sub>) and oxygen (O2<\/sub>) to be used on stationary source emissions. This document describes methods and equipment for the measurement of concentrations of these gases.<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 23210:2009<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Stationary source emissions
    Determination of PM10\/PM2,5 mass concentration in flue gas
    Measurement at low concentrations by use of impactors<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 9001:2015<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Globally recognized standard for quality management<\/b>. It helps organizations of all sizes and sectors to improve their performance, meet customer expectations and demonstrate their commitment to quality. Its requirements define how to establish, implement, maintain, and continually improve a quality management system (QMS).<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 15259:2023<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Air quality
    Measurement of stationary source emissions
    Requirements for measurement sections and sites and for the measurement objective, plan and report<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 11204:2010<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Specifies a method for determining the emission sound pressure levels of machinery or equipment, at a work station and at other specified positions nearby, in any environment which meets certain qualification requirements.<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t

    \n\t\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t<\/path><\/svg><\/span>\n\t\t\t\t\t\t\t\t\t\t\t\t\t<\/span>\n\t\t\t\t\t\t\t\t\t\t\t\tISO 9223:2012<\/a>\n\t\t\t\t\t<\/div>\n\n\t\t\t\t\t

    Corrosion of metals and alloys
    Corrosivity of atmospheres
    Classification, determination and estimation<\/p><\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

    ISO-Standards Operations: The Oaktree is either certified or follow the following ISO standards. ISO 9001-2015 Quality Management System -It helps organizations of all sizes and sectors to improve their performance, meet customer expectations and demonstrate their commitment to quality. Its requirements define how to establish, implement, maintain, and continually improve a quality management system (QMS). […]<\/p>\n","protected":false},"author":2,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_eb_attr":"","content-type":"","_uag_custom_page_level_css":"","footnotes":""},"class_list":["post-166","page","type-page","status-publish","hentry"],"yoast_head":"\nISO Standards - The Oaktree<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.theoaktree.us\/?page_id=166\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"ISO Standards - The Oaktree\" \/>\n<meta property=\"og:description\" content=\"ISO-Standards Operations: The Oaktree is either certified or follow the following ISO standards. ISO 9001-2015 Quality Management System -It helps organizations of all sizes and sectors to improve their performance, meet customer expectations and demonstrate their commitment to quality. Its requirements define how to establish, implement, maintain, and continually improve a quality management system (QMS). […]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.theoaktree.us\/?page_id=166\" \/>\n<meta property=\"og:site_name\" content=\"The Oaktree\" \/>\n<meta property=\"article:modified_time\" content=\"2024-04-15T01:36:40+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:site\" content=\"@theoaktree\" \/>\n<meta name=\"twitter:label1\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data1\" content=\"1 minute\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.theoaktree.us\\\/?page_id=166\",\"url\":\"https:\\\/\\\/www.theoaktree.us\\\/?page_id=166\",\"name\":\"ISO Standards - The Oaktree\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.theoaktree.us\\\/#website\"},\"datePublished\":\"2023-06-13T16:00:14+00:00\",\"dateModified\":\"2024-04-15T01:36:40+00:00\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.theoaktree.us\\\/?page_id=166#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.theoaktree.us\\\/?page_id=166\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.theoaktree.us\\\/?page_id=166#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.theoaktree.us\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"ISO Standards\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.theoaktree.us\\\/#website\",\"url\":\"https:\\\/\\\/www.theoaktree.us\\\/\",\"name\":\"The Oaktree\",\"description\":\"Good Thoughts, Good Words, Good Deeds - For A Better World\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.theoaktree.us\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.theoaktree.us\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.theoaktree.us\\\/#organization\",\"name\":\"The Oaktree\",\"url\":\"https:\\\/\\\/www.theoaktree.us\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.theoaktree.us\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.theoaktree.us\\\/wp-content\\\/uploads\\\/2023\\\/05\\\/Logo-Final-scaled.jpg\",\"contentUrl\":\"https:\\\/\\\/www.theoaktree.us\\\/wp-content\\\/uploads\\\/2023\\\/05\\\/Logo-Final-scaled.jpg\",\"width\":2560,\"height\":1978,\"caption\":\"The Oaktree\"},\"image\":{\"@id\":\"https:\\\/\\\/www.theoaktree.us\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/x.com\\\/theoaktree\",\"https:\\\/\\\/www.linkedin.com\\\/company\\\/theoaktree-us\\\/?viewAsMember=true\"]}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"ISO Standards - The Oaktree","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.theoaktree.us\/?page_id=166","og_locale":"en_US","og_type":"article","og_title":"ISO Standards - The Oaktree","og_description":"ISO-Standards Operations: The Oaktree is either certified or follow the following ISO standards. ISO 9001-2015 Quality Management System -It helps organizations of all sizes and sectors to improve their performance, meet customer expectations and demonstrate their commitment to quality. Its requirements define how to establish, implement, maintain, and continually improve a quality management system (QMS). […]","og_url":"https:\/\/www.theoaktree.us\/?page_id=166","og_site_name":"The Oaktree","article_modified_time":"2024-04-15T01:36:40+00:00","twitter_card":"summary_large_image","twitter_site":"@theoaktree","twitter_misc":{"Est. reading time":"1 minute"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.theoaktree.us\/?page_id=166","url":"https:\/\/www.theoaktree.us\/?page_id=166","name":"ISO Standards - The Oaktree","isPartOf":{"@id":"https:\/\/www.theoaktree.us\/#website"},"datePublished":"2023-06-13T16:00:14+00:00","dateModified":"2024-04-15T01:36:40+00:00","breadcrumb":{"@id":"https:\/\/www.theoaktree.us\/?page_id=166#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.theoaktree.us\/?page_id=166"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/www.theoaktree.us\/?page_id=166#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.theoaktree.us\/"},{"@type":"ListItem","position":2,"name":"ISO Standards"}]},{"@type":"WebSite","@id":"https:\/\/www.theoaktree.us\/#website","url":"https:\/\/www.theoaktree.us\/","name":"The Oaktree","description":"Good Thoughts, Good Words, Good Deeds - For A Better World","publisher":{"@id":"https:\/\/www.theoaktree.us\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.theoaktree.us\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.theoaktree.us\/#organization","name":"The Oaktree","url":"https:\/\/www.theoaktree.us\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.theoaktree.us\/#\/schema\/logo\/image\/","url":"https:\/\/www.theoaktree.us\/wp-content\/uploads\/2023\/05\/Logo-Final-scaled.jpg","contentUrl":"https:\/\/www.theoaktree.us\/wp-content\/uploads\/2023\/05\/Logo-Final-scaled.jpg","width":2560,"height":1978,"caption":"The Oaktree"},"image":{"@id":"https:\/\/www.theoaktree.us\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/x.com\/theoaktree","https:\/\/www.linkedin.com\/company\/theoaktree-us\/?viewAsMember=true"]}]}},"featured_image_src":null,"featured_image_src_square":null,"uagb_featured_image_src":{"full":false,"thumbnail":false,"medium":false,"medium_large":false,"large":false,"1536x1536":false,"2048x2048":false,"gb-block-post-grid-landscape":false,"gb-block-post-grid-square":false},"uagb_author_info":{"display_name":"Magnus Kolaas","author_link":"https:\/\/www.theoaktree.us\/?author=2"},"uagb_comment_info":0,"uagb_excerpt":"ISO-Standards Operations: The Oaktree is either certified or follow the following ISO standards. ISO 9001-2015 Quality Management System -It helps organizations of all sizes and sectors to improve their performance, meet customer expectations and demonstrate their commitment to quality. Its requirements define how to establish, implement, maintain, and continually improve a quality management system (QMS).…","_links":{"self":[{"href":"https:\/\/www.theoaktree.us\/index.php?rest_route=\/wp\/v2\/pages\/166","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.theoaktree.us\/index.php?rest_route=\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.theoaktree.us\/index.php?rest_route=\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.theoaktree.us\/index.php?rest_route=\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.theoaktree.us\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=166"}],"version-history":[{"count":0,"href":"https:\/\/www.theoaktree.us\/index.php?rest_route=\/wp\/v2\/pages\/166\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.theoaktree.us\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=166"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}